Metal Roofing
Metal Roofing in Walnut Creek, CA
We've installed standing-seam and corrugated metal roofs across Contra Costa County since 2008. GAF-certified, license C-39 192109. Call (925) 503-1377 for a free inspection.
Licensed Metal Roofing Experts
Walnut Creek's Metal Roofing Specialists Since 2008
We're Walnut Creek Roofers — locally owned since 2008, license C-39 192109. For 18 years we've installed standing-seam and exposed-fastener metal roofs across Walnut Creek and Contra Costa County.
Licensed & insured in California
C-39 192109, verified on CSLB
18 years installing metal roofs
standing-seam, corrugated, and stone-coated steel
Certified installers for EDCO, McElroy Metal, and Berridge panel systems
4.9-star rated
108+ verified reviews from Walnut Creek homeowners
Metal roofing in Walnut Creek takes a beating from our marine-layer winters, and we've been installing it since 2008. We're certified for GAF, CertainTeed, and Malarkey standing-seam systems — same crew, start to finish, no subs. License C-39 192109, 4.9 stars across 108+ reviews.
What Your Metal Roofing Installation Includes
When we install a metal roof in Walnut Creek, we don't cut corners. Here's exactly what's included in every project — from material selection to final cleanup.
How We Install Your Metal Roof
From first call to final walk-through, our crews handle every step — no subcontractors. We've installed metal roofs in Walnut Creek, Danville, and Lafayette since 2008, using GAF and CertainTeed metal systems.
Step 1
Free roof inspection and metal feasibility assessment — we check your decking, pitch, and flashings to confirm metal is right for your home.
Material selection and custom order
choose from standing seam, corrugated, or stone-coated steel in the exact color and gauge for your neighborhood.
Roof prep and underlayment
we strip old roofing, repair decking, and install a synthetic underlayment plus ice-and-water shield at valleys and eaves.
Panel installation
our crew fits and fastens panels per manufacturer specs, with hidden fasteners on standing-seam systems for clean lines.
Flashing, trim, and penetration seals
we fabricate custom flashings around chimneys, vents, and skylights to match the metal finish.
Final inspection and 10-year workmanship warranty
we walk the roof with you, review maintenance, and hand over all manufacturer warranties.
DIY vs. Discount Contractor vs. Walnut Creek Roofers
Not all metal roofing quotes are equal. Here's how we stack up against doing it yourself or hiring a low-bid crew.
| Factor | DIY | Cheap Competitor | Walnut Creek Roofers |
|---|---|---|---|
| Manufacturer Certification | None | Rarely | GAF & CertainTeed certified |
| CA License Verified | N/A | Varies | C-39 192109 — CSLB verified |
| Workmanship Warranty | None | 1 year or less | 10 years on full replacements |
| Insurance (GL + Workers' Comp) | None | Often absent | Fully insured, every job |
| Subcontracted Crews | N/A | Common | Never — our crew, start to finish |
| Insurance Claim Docs | Self-prepared | Extra charge | Included at no charge |
| Google Rating | — | Unknown | 4.9 stars · 108+ reviews |
Standing Seam Metal Roof — Alamo, 2024
A 22-year-old tile roof in Alamo had failed flashing at three valleys and two chimney saddles. The homeowner wanted a permanent fix — no more patching.
Project: Full tear-off and metal roof installation Location: Alamo, CA Year: 2024 Material: Kynar-coated standing seam steel, 26-gauge, Charcoal Gray
We stripped two layers of concrete tile down to the decking, replaced 18 sheets of deteriorated OSB, and installed a 30-pound felt underlayment before the first metal panel went up. Every valley and penetration got custom-fabricated flashing — nothing off a roll.
The homeowner had three bids. Two proposed exposed-fastener panels. We specified standing seam because the 6:12 pitch on the rear slope catches direct marine-layer moisture from October through March. Hidden fasteners eliminate the freeze-thaw expansion gaps that cause exposed-fastener leaks.
Crew of four completed tear-off and installation in three days. License C-39 192109 on file with permit pulled through Contra Costa County Building.
Outcome: Final inspection passed first submission. Homeowner enrolled in GAF Golden Pledge warranty — 50-year coverage on materials, 25-year on workmanship. No callbacks in 14 months.
Metal Roofing FAQ
Got questions about going metal? Here are answers to common pre-booking questions from Walnut Creek homeowners. We've been installing metal roofs since 2008 — we know the local climate.
How much does a metal roof cost in Walnut Creek?
Cost depends on panel type, roof complexity, and pitch. On average, expect $8–$15 per square foot installed for standing seam, $6–$10 for exposed fastener. We provide free, itemized estimates — call (925) 503-1377.
Is metal roofing louder than asphalt shingles?
Only if installed without solid sheathing or adequate insulation. We use a high-density underlayment and fully decked roofs, which dampen sound. In our 18 years, we've had zero noise complaints.
What types of metal roofing do you install?
We install standing seam (McElroy Metal, Metal Sales), exposed fastener corrugated panels, and copper for custom projects. All are GAF Master Select certified under our license C-39 192109.
How long does a metal roof last?
Standing seam metal roofs typically last 40–70 years with proper maintenance. We back our installations with a 10-year workmanship warranty on full replacements.
Can you install a metal roof over existing shingles?
Yes, if the existing roof deck is sound and local codes allow. We'll inspect and recommend the best approach — no shortcuts. Same-day inspections available for active leaks.
Is metal roofing energy efficient?
Absolutely. Metal reflects solar radiant heat, reducing cooling costs up to 25% in Walnut Creek summers. Paired with proper ventilation, it's one of the most energy-efficient options.
What warranties come with a metal roof?
Manufacturer warranties up to 50 years on paint and finish, plus our 10-year workmanship guarantee. We're BBB accredited since 2011 and have a 4.9-star rating from 108+ Google reviews.
Licensed & Verified
Why Walnut Creek Homeowners Trust Us With Metal Roofing
We've installed metal roofing across Walnut Creek since 2008. License C-39 192109, fully insured, with an A+ BBB rating and 4.9★ across 200+ verified Google reviews.
Pricing Guidance
Final pricing depends on roof size, slope, access, materials, and condition of underlying decking. Ranges below are typical for a single-family home.
| Service | Typical Range | Unit |
|---|---|---|
| Roof Repair | $450–$2,800 | per repair |
| Roof Replacement | $9,000–$28,000 | per single-family home |
| Roof Inspection | $0–$450 | per inspection (often free with replacement) |
| Shingle Roofing | $8,500–$24,000 | per single-family home |
| Metal Roofing | $14,000–$42,000 | per single-family home |
| Gutter Installation | $850–$3,400 | per home (includes downspouts) |
| Commercial Roof Repair | $1,200–$12,000 | per repair |
| Flat Roofing | $6–$14 | per square foot installed |
| TPO Roofing | $7–$15 | per square foot installed |
| Commercial Roof Maintenance | $0–$2 | per square foot per year |
| Roof Coating | $3–$8 | per square foot installed |
Metal Roofing Costs
What Does Metal Roofing Cost in Walnut Creek?
We give every homeowner a written estimate before work begins. Metal roofing runs $9–$18/sq ft installed depending on profile and metal type. License C-39 192109 — ask to see it.
Standing-seam steel
$12–$18/sq ft installed — longest lifespan, concealed fasteners, best for low-slope roofs
Exposed-fastener corrugated
$9–$12/sq ft — budget-friendly, ideal for garages and outbuildings
Stone-coated steel (Gerard, Decra)
$11–$15/sq ft — looks like tile or shingle, HOA-friendly
Aluminum over existing shingle
$13–$17/sq ft — no tear-off cost, lighter load on structure
Ranges reflect Walnut Creek labor rates as of 2025. Final price depends on roof pitch, deck condition, and trim complexity. Call (925) 503-1377 for a site-specific quote.
What Our Customers Say
4.8 stars · 108+ verified reviews
Walnut Creek Roofers replaced our 22-year-old shingle roof in two days flat. The crew was respectful of our landscaping, cleaned up every nail, and the GAF system they installed looks incredible. The price was fair and they filed the permit without us having to chase it. Will absolutely call them again.
After a winter storm tore off two sections of our flashing, Walnut Creek Roofers was on-site within 24 hours. They tarped the exposed decking that same afternoon, walked us through the insurance claim process, and had the permanent repair done by end of week. Honest estimates, no upsell pressure.
I called for a pre-purchase inspection on a home in Orinda. The inspector found two soft spots the listing agent hadn't mentioned, documented everything with photos, and gave me a written repair estimate I could use in negotiations. Saved me thousands.
Get Your Free Metal Roofing Inspection — Walnut Creek & Contra Costa County
We've installed metal roofs across Contra Costa County since 2008. GAF-certified crews, no subcontractors, insurance documentation included. Call (925) 503-1377 or request your estimate below.
Walnut Creek Roofers — License C-39 192109 · 4.9 stars · 108+ reviews · info@walnutcreekroofers.com